VSELP COMPATIBILITY QUESTION AS1 with 2 ASIII's

[wazzzzzzzzup]

got a wierd problem


about 3 yrs ago i purchased several VHF ASIII radios that use VSELP. when the shop set them up the vselp worked great, but no special VSELP options were changed. they both came from the same user so they talked together beforehand in VSELP anyway. we just recently bought a AS1 VHF. the shop set it up for analog and VSELP on various channels. but it wont communicate with the other 2 VSELP radios. all the basics lign up, CSQ or network id's set the same, no different. i have confirmed its not putting out APCO25 because the scanner doesnt decode it. the data sounds so close to the other ASIII's.

the shop went thru every common astro option and compared them, they all seem to be the same, maybe theres something that gets changed sometimes for VSELP that sometimes ppl dont know about. that the shop is overlooking. heres the specs on the radios.

the ASI
H04KDC9PW5AN
software ver H35
Radio SW VER 03.20.01.00
DSP M05.00.18
codeplug ver 0007
FLASHCODE 0000010000009

the ASIII's
H04KDH9PW7AN
Software ver H38
Radio SW VER 03.17.XX.XX (theres actually X's on the screen)
DSP VER "not available" (actually says that on the screen)
Radio Codeplug Ver 000A
FLASHCODE 0000080000002

any ideas will be helpful

wazz

[sq5ag]

Hi!

It seems that we have the same problem:
http://batboard.batlabs.com/viewtopic.php?t=53792

Even the flashcodes are the same!
I haven't yet found a solution to this problem.

Do the "good" radios react like mine when you key or dekey the "bad" radio? (RX LED lights up for a short time on the "good" radios) If they don't do even that, it could be a problem with the alignment of the "bad" radio.