building repeater from 2 gm 300's

jere zimmerman · Post by **jere zimmerman** » Fri Jan 20, 2006 10:35 pm

Hello: Does anyone have the schematic to build the cable that goes from one radio to the other or the style that uses relays to enable the 2 gm 300's to be used as a repeater, Thanks Jere

bellersley · Post by **bellersley** » Fri Jan 20, 2006 11:12 pm

If you look under the Radius page on Batlabs, there's some good tips/schematics to do exactly what you need. I've built one using two Maxtrac radios and it worked great!

bellersley · Post by **bellersley** » Fri Jan 20, 2006 11:13 pm

If you look under the Radius page on Batlabs, there's some good tips/schematics to do exactly what you need. I've built one using two Maxtrac radios and it worked great!

jwb8734 · Post by **jwb8734** » Fri Jan 27, 2006 4:53 am

Works well if the In/Out PL is the same. I programmed the in PL different from the Out PL but the Input radio overrides the output PL programmed in the radio.