Help Anybody!!
I am trying to connect an M1225 to the 50 pin accessory on the back of a VHF conventional quantar. I need some help. I do have a manual for both the quantar and quantar RSS. I'm confused on setting for the wild card and such. I am hoping that the quantar has identical pins for the following on the M1225.
Pin 2 - Mic Audio
Pin 3 - PTT
Pin 7 - Gnd
Pin 8 - COS
Pin 11 - Rx disc.
If anyone can help that would be appreciated. I can also send the code plug to you via email if you can make changes to the wild card settings if needed.
[email protected]
Thanks to anyone who can help,
Jamie
Quantar Accessory Help NEEDED!!
Moderator: Queue Moderator
Look for the "System Applications" tab in the Quantar service manual.
In that section you will find complete instructions for interfacing the Quantar to a variety of external devices including which pins to connect to for receiver and transmitter audio, COR & PTT.
The wild card programming does not need to be changed from default unless you need something more than COR & PTT.
In that section you will find complete instructions for interfacing the Quantar to a variety of external devices including which pins to connect to for receiver and transmitter audio, COR & PTT.
The wild card programming does not need to be changed from default unless you need something more than COR & PTT.