mts2000 mtva

claywight · Post by **claywight** » Fri Feb 17, 2006 4:30 pm

I have a mts2000 and i put it in the MTVA with amp.. It shows that is charges but i lock it in no sound or PTT. but when its looked in no sound from radio.

spectragod · Post by **spectragod** » Fri Feb 17, 2006 5:37 pm

Speaker attached???

SG

Post by **wavetar** » Sat Feb 18, 2006 6:08 am

As spectragod noted, you need the HSN1000 amplified speaker plugged in to have RX audio. For the PTT problem, there are two small white dip switches recessed right next to where the palm mic plugs in...I forget which way they should be set, but do know the mic won't work if they aren't set properly.

Todd

spectragod · Post by **spectragod** » Sat Feb 18, 2006 6:30 am

Additionally, you should have the metal bracket the goes around the MTVA, without it, you will suffer from TX/RX problems.

SG

claywight · Post by **claywight** » Sat Feb 18, 2006 7:25 am

yeah everything is there. Some said mybee a rss problem. I don't have a ant on the amp or the cradle....