Radius M216 speaker

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
xxx2fan
Posts: 84
Joined: Mon Oct 31, 2005 4:42 pm
What radios do you own?: HT750 Ht1250 CDM1250 CDM1550

Radius M216 speaker

Post by xxx2fan »

I can someone tell me what I'm missing. Have a M216 that came out of our fire truck and want to put in chief's car. How do I change it so it uses the internal speaker. I'm lost here for some reason. Anyone could point me in the right dierection.

Thanks

I've looked at the stuff at batlabs and still lost.
Am i missing a setting in the software. or do I have to jumper something on the 16 pin connector.

Thanks again
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

If the radio has the 16 pin connector, there needs to be a jumper added on the accessory plug. Pins 15 and 16 are jumperd to enable the internal speaker. Also pins 5 and 7 are also normally jumpered.
This IS discussed with photos here on the BatBoard. The Search function is your friend.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”