The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!
Hello to all. It has been a while since I posted. Luckily I haven't had much break lately. I recently received an A9 VHF high power spectra T83FWA7HA9AK and it was damaged during transit (everything else works great). The power plug pins have broken and now it needs this plug I took it apart and can easily replace it (looks that way) but am wondering where this plug might be obtained, other than my local M dealer; I know it would be a small fortune. I'll be at Charlotte hamfest on March 11 to look for some parts.
Thanks again for any advice.
Mike
Brian Griffin: Ah, if my memory serves me, this is the physics department.
Chris Griffin: That would explain all the gravity.
.
Lois: Peter, you're drunk again.
Peter: No, I'm just exhausted because I've been up all night drinking.
you might be better off trying to solder those wires directly to the board and use a fuse holder to separate it. just a suggestion.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
It is actually the plastic tabs that cover the pins and the one that the threaded thumbscrew tab that holds the power plug in place. I cannot believe he shipped it with the power plug attached.....oh well. I am contacting Jason for the part.
Thanks again,
Mike
Brian Griffin: Ah, if my memory serves me, this is the physics department.
Chris Griffin: That would explain all the gravity.
.
Lois: Peter, you're drunk again.
Peter: No, I'm just exhausted because I've been up all night drinking.
I took it apart and can easily replace it (looks that way) but am wondering where this plug might be obtained, other than my local M dealer; I know it would be a small fortune. I'll be at Charlotte hamfest on March 11 to look for some parts. 
