Anyone have a schematic, pinout or connection diagram for the NSN 6054 amplified speaker?
Thanks,
Ed
Need schematic for NSN6054 amplified speaker
Moderator: Queue Moderator
This is probably the most asked and unanswered question I've seen on this board. I have seen it asked many times and NEVER answered. It's like the 6054 speaker doesn't exist.
The only thing I've learned is that the squelch line requires a positive voltage to activate the speaker. The MVA provides this. Someone once said 12vdc will do it, but I've never tried it.
Good luck.
The only thing I've learned is that the squelch line requires a positive voltage to activate the speaker. The MVA provides this. Someone once said 12vdc will do it, but I've never tried it.
Good luck.
Chris,
Hamming 31 years
http://www.wa2zdy.com
Wesley Chapel, Pasco County, Florida
Snow? What's that?!
The human race is proof that Darwin was wrong.
Hamming 31 years
http://www.wa2zdy.com
Wesley Chapel, Pasco County, Florida
Snow? What's that?!
The human race is proof that Darwin was wrong.
speaker wiring
A little web searchery and some reverse engineering and I figured it out.
Red & yellow + (both go to same place on PC board)
Black & Brown - or ground (both go to same place on PC board)
Blue audio high
White audio low or ground
Green mute, tie to + to enable speaker
Red & yellow + (both go to same place on PC board)
Black & Brown - or ground (both go to same place on PC board)
Blue audio high
White audio low or ground
Green mute, tie to + to enable speaker