need help programming GM350

network · Post by **network** » Sun Mar 05, 2006 2:52 pm

Hi, i made the rib that has the link on the button of this page.

I am trying to program the radio with versions R 03.00.08 and R08.01.00, but the software say me " Radio not respond " about 4 times and then " Codeplug version not supported by this RSS "

The radio info is this:
Model NO: M08KHE4AA2AN
TYPE NO: MD334BA
TANAPA: EUD4844B
SERIAL NO: 821IXL4283

Can you help me with this problem? I made the rib from this link:

http://www.ham.dmz.ro/motorola/gm300-rib-ivg.php

I don´t know if i did somethig wrong or i have not the required software. I am new on this...

Thanks everybody.

HLA · Post by **HLA** » Sun Mar 05, 2006 3:53 pm

it's usually best to use the newest software but you need to start borrowing parts that you know work and try them so you can start eliminating what works and what don't.

Will · Post by **Will** » Mon Mar 06, 2006 12:41 am

The so called RIB you reffer to will not work on the newer radios, it lacks the BUSY and BUSS- lines.

You will need the full RIB, from Motorola.

network · Post by **network** » Mon Mar 06, 2006 3:56 am

So... Motorola GM350 are new or old radios ? I think they are old radios, isn´t it ?