Minitor V engineer data access?

PNGR1209 · Post by **PNGR1209** » Wed Feb 08, 2006 12:02 pm

Anyone know how to access the engineering data on the Minitor V PPS?

I can do it for the Minitor III/IV but the V is different.

Thanks.

Andy2712 · Post by **Andy2712** » Fri Mar 17, 2006 4:28 pm

Can I get the engineering password?

PNGR1209 · Post by **PNGR1209** » Fri Mar 17, 2006 4:51 pm

See prior posts.

HRN · Post by **HRN** » Fri Mar 17, 2006 6:36 pm

At this point, Engineer Data is not built into the RSS (To my knowledge).... That is left over from the Minitor III/IV RSS.

jmr3865 · Post by **jmr3865** » Fri Mar 17, 2006 6:41 pm

HRN · Post by **HRN** » Fri Mar 17, 2006 7:22 pm

Yeah, PPS. That is what I meant. I was just working with the MT1000 RSS when I wrote it and that was what was in my head. The "too my knowledge" part had to do with it not being available to the Minitor V.

PNGR1209 · Post by **PNGR1209** » Sat Mar 18, 2006 5:48 am

The only part that makes me think it is in there is this: there was a Min V for sale on ebay not too long ago and the guy had printed a data sheet on it. At the bottom just like a Min IV was the engineer data. When I print mine, it is not shown.

Maybe there are two versions of the PPS.

daveman · Post by **daveman** » Fri Mar 31, 2006 8:02 am

I looked at the program in a hex editor and the engineering data headings as well as the password are still there. Even the dialog box for the password is in there. No way to access found so far. Ctrl-L and F6 don't work. This all could just be a holdover from the M4 PPS. Maybe somebody with more knowledge of Windows programming can give us an answer!

Minitor V engineer data access?

Minitor V engineer data access?

can you give me the pass word