Spectra Button Question please...

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
kd6rfs
Posts: 72
Joined: Tue Mar 28, 2006 5:43 pm

Spectra Button Question please...

Post by kd6rfs »

HI...I am a bit confused about the Spectra "Emerg" button....on my A% head it is plugged...my radio can do emergency feature, but it is currently disabled, which is fine, because I have no use for that right now...but since my radio can be enabled for Emerg...I want to have the button on the front....will it just beep once I put the button in since the feature is disabled? I have the keypad names set right, with emerg on the first (currently blank) button....NOW....I have seen the regular white button that says "Emerg" in black, what is the RED Emerg button? is the actual button RED or is it white with just the writing in RED? Also...what is the RED Emerg Plunger? from what I can gather...is it a raised area that a red or black emerg button goes into?? and do they have RED plunger and Black PLunger? I am confused about the entire red/black emerg buttons and plunger thing...any detailed info would be appreciated....thanks, David KD6RFS
User avatar
Rick Rock
Posts: 757
Joined: Wed Dec 25, 2002 10:08 am

Re: Spectra Button Question please...

Post by Rick Rock »

kd6rfs wrote:HI...I am a bit confused about the Spectra "Emerg" button....on my A% head it is plugged...my radio can do emergency feature, but it is currently disabled, which is fine, because I have no use for that right now...but since my radio can be enabled for Emerg...I want to have the button on the front....will it just beep once I put the button in since the feature is disabled?
This button is just like any other button on the head- you just pop out the plug and insert a button from the backside, enable it, and you're good to go.
I have the keypad names set right, with emerg on the first (currently blank) button....NOW....I have seen the regular white button that says "Emerg" in black, what is the RED Emerg button? is the actual button RED or is it white with just the writing in RED?
There are several different EMERG buttons you can get, it just depends on your preference.
Also...what is the RED Emerg Plunger? from what I can gather...is it a raised area that a red or black emerg button goes into?? and do they have RED plunger and Black PLunger? I am confused about the entire red/black emerg buttons and plunger thing...any detailed info would be appreciated....thanks, David KD6RFS
I believe the button you are referring to is used in 'high stakes' situations, where you don't want to accidently hit it, because once it's pressed, there is going to be a response equal to an 'officeer down' call on the radio. The buttons all serve the same function, they all press the same spot on the circuit board, it's merely a cosmetic appearance difference.
Image
The Batlounge admin
http://www.batlounge.us
Hartley
Batboard $upporter
Posts: 338
Joined: Mon Sep 03, 2001 4:00 pm

EMER Button

Post by Hartley »

Hi David,

There are (as you have discovered) several "EMER" buttons - they all do exactly the same thing with the radio, but they do look & act a bit differently.

There is a white one with a black "EMER" on it, as well as a red one with white " EMER" on it - these are the same shape as all the "normal" buttons.
The "plunger" version is a two-part deal - a small red plunger and a larger black piece that snaps into the hole with the small plunger sticking up in the middle. The black piece is "dished", so the button is protected from accidental pressing. There is no label on this button.

I use one of the "plunger" types on my "airhorn" position - keeps me from making inadvertant loud noises...:-)

73 DE Hartley
User avatar
Rick Rock
Posts: 757
Joined: Wed Dec 25, 2002 10:08 am

Re: EMER Button

Post by Rick Rock »

Hartley wrote:I use one of the "plunger" types on my "airhorn" position - keeps me from making inadvertant loud noises...:-)

73 DE Hartley
But those inadvertent squawks are quite entertaining @ times!
Last edited by Rick Rock on Wed Apr 05, 2006 9:19 am, edited 1 time in total.
Image
The Batlounge admin
http://www.batlounge.us
kd6rfs
Posts: 72
Joined: Tue Mar 28, 2006 5:43 pm

how can i get a plunger!!

Post by kd6rfs »

okay...How can I get my hands on a Plunger style emer button??? ANYONE have one for sale??? please let me know asap at [email protected] or 805-290-5003 I live near los angeles I know it is a small pretty cheap priced part, but I will pay whatever is fair, thanks David
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”