MOTOROLA RADIUS D33LRA77A5CK

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
AUTO
Posts: 7
Joined: Tue Apr 11, 2006 10:39 pm

MOTOROLA RADIUS D33LRA77A5CK

Post by AUTO »

Hi, I'm looking for info on a MOTOROLA RADIUS D33LRA77A5CK , I can't seem to find anything on this radio.
Does anybody know which software is used to program this radio ?



Thanks for any help :o
User avatar
kcbooboo
Batboard $upporter
Posts: 2117
Joined: Wed May 01, 2002 9:03 am

Post by kcbooboo »

The program is called RADMBL. It's specifically for the Radius Mobile. You can't use the MAXTRAC program on the Radius.

That particular radio is a 25w VHF model with 6 channels.

The Radius line is 99% the same as the MaxTrac line. One was sold through dealers, the other was not. One had more options available than the other. I believe the 900 MHz radios were only MaxTracs.

Bob M.
AUTO
Posts: 7
Joined: Tue Apr 11, 2006 10:39 pm

Post by AUTO »

Thanks for the info !

also I heard there is a mod to turn this radio into 32 ch, is this possible ?
User avatar
kcbooboo
Batboard $upporter
Posts: 2117
Joined: Wed May 01, 2002 9:03 am

Post by kcbooboo »

Possibly, if the logic board supports it. You'd have to change the firmware in the radio, and maybe even turn it into a MaxTrac, thus requiring MaxTrac software to program it.

There may be more information on this on batlabs and on repeater-builder.com in the Motorola/MaxTrac section.

Bob M.
AUTO
Posts: 7
Joined: Tue Apr 11, 2006 10:39 pm

Post by AUTO »

Thanks! 8)
Post Reply

Return to “Radio Programming”