HT1250 Programming difficulty

tarheelmedic · Post by **tarheelmedic** » Tue Apr 11, 2006 3:21 pm

I recently purchased a VHF HT1250 from someone used online. I took it to someone to get it programmed, however he's telling me that he can't get the radio to open. He says it tells him the port won't open. However he can open other HT 1250's without a problem. Any ideas?

HLA · Post by **HLA** » Tue Apr 11, 2006 4:25 pm

what is the model number on the back of the radio? it's possibel it's not a ht1250, it could be a pro7150 with a 1250 sticker on it. and what happens when you turn the radio on, does it work or say eeprom error or what? it's also possible that your ribbon cable is bad inside or try cleaning the side terminals on the radio with a pencil eraser. another thing to try is opening a codeplug from another radio with the same model number and try to write it to the radio without reading yours first.

SD70MAC · Post by **SD70MAC** » Wed Apr 12, 2006 1:58 pm

Are you in North Carolina ? I can program it even if its a PRO7150. Email me I'll see if we are close.

tarheelmedic · Post by **tarheelmedic** » Wed Apr 12, 2006 2:18 pm

Model # AAH25KDF9AA5AN

Can ya tell me anything about it from that?

I'm new to the whole radio thing...so any help would be great.

HLA · Post by **HLA** » Wed Apr 12, 2006 7:22 pm

that says it is an american version of the radio and it's a vhf and a limited keypad non trunking radio. he should be able to do it. try opening a codeplug from another vhf radio and writing that to your radio first then try altering it.

tarheelmedic · Post by **tarheelmedic** » Thu Apr 13, 2006 2:57 am

alright I'll tell him to try that...thanks!