Info DC remote t1882b and tln1126a

bluebob · Post by **bluebob** » Tue Apr 18, 2006 5:59 pm

Hello, I need info for the connection of Dc remote motorola t1882b and contoller tln1126a for connect togeder and would like to conect to a GM300 if possible.
Thank you.
P.S. photo of equipement

http://www.francoisrioux.com/image/P4180001.JPG

Will · Post by **Will** » Tue Apr 18, 2006 11:41 pm

Well, the DC remote adaptor is probally older that you are. But they are a good unit.
This one even has the Monitor relay on it.

I would have to look up the connections, as it has been a long time ago that I had to hook one up.

k2hz · Post by **k2hz** » Wed Apr 19, 2006 8:54 am

The pin outs on the TLN1126A are:

Front terminal strip:

3 - Control Line - (Line from T1882B Main -)
4 - Control Line + (Line from T1882B Main +)

Radio Interface:

A (Yel-Grn) PTT
B (Yel) Floating side of RX audio transformer
C (Blk) Ground side of RX audio transformer
D (Blu) TX audio input
E/F (Org) PL relay contacts

Line Input Control on front sets audio level to TX.
Adjust the radio RX audio to set level into control line.

bluebob · Post by **bluebob** » Wed Apr 19, 2006 9:34 am

Thank's, i try this and return feed back !!!!
Bye.

GlennD · Post by **GlennD** » Wed Apr 19, 2006 5:03 pm

I have a brand new TLN1128A here. I just pulled it to see if I had the docs but they are long gone. If you want it you can have it for $10 to cover shipping.

This one does not have the monitor relay hanging from the side so I guess the 28 is the carrier sq model.

bluebob · Post by **bluebob** » Sun May 07, 2006 4:07 pm

Yes ! The pin outs work fine.
Thank you.