Desktrac Rptr Question

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Dougdeutsch
Posts: 104
Joined: Sat Jan 18, 2003 8:17 pm

Desktrac Rptr Question

Post by Dougdeutsch »

Hi All,

I just became the owner of a Desktrac UHF repeater L44SUM7000BT. It won't power up when I plug it in. I noticed the 2 DB25 connectors on the rear. Could it have been used (cotrolled) remotely?? Any other thoughts would be greatly appreciated.

Thank you!!!

Doug in PA.
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Post by HLA »

open it up and tell us what you see. are all the parts in it? check fuses first. a picture of the insied would help too.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

#1 check the power supply for the correct 13.6 VDC. The power supply is 'hot all the time' the DT is plugged in to the AC.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”