GP360 programming cable

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
OZ7AE
Posts: 4
Joined: Tue Apr 18, 2006 12:16 am

GP360 programming cable

Post by OZ7AE »

I have bought a programming cable for my GP360, but I can´t read the radio! I am using the same pc and original software for my GM360 without any problems. Also using original Motorola RIB.

Are there different models GP360 for US and Europe with different pin connections? or where is the error to be found?

The radio is brand new. Only programmed once by the dealer using same software as I.

The cable is bought by Wiscomm.


73 vy de Benny OZ7AE
Top
Andreas
Posts: 626
Joined: Sun Sep 09, 2001 4:00 pm
What radios do you own?: radios

Post by Andreas »

Check the cable first,but sometimes the radio connector is bad!
I had several radios with a bad connector.Change the housing and try it again.

Andreas
Top
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Post by HLA »

i'd try it on another radio first. or take a pencil eraser to the contacts on your radio and make shure they are clean. those gp radios are not supposed to be here in the states, we use the ht's but there is no difference in the cable.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Top
Post Reply

Return to “Radio Programming”