T3011AX was upgraded, but not sure if CX or DX

[Hightower]

Have an T3011AX keyloader that has been upgraded, but not sure if it has been uplifted to a "CX" or "DX". How does one find out?

Here is some more info that might help to determine if it's a CX or DX:

The EEPROM has a sticker inside that says "Astro Upgrade"

When I power it on it says:
BUSY.... A few seconds later it says CAL?

If I press the SEQ button, it cycles through:
CAL?
LOAD?
G LOAD?
SHARE?
ASN?

Thanks for any information

[Hightower]

No one knows the answer?

[batdude]

short of dumping the PROM, you can't really determine the answer.


try to keyload the radio in your avatar... if it works, it's a DX


(be sure PID key management is CHECKED in CPS ... or it won't work)



doug

[Hightower]

short of dumping the PROM, you can't really determine the answer.


try to keyload the radio in your avatar... if it works, it's a DX


(be sure PID key management is CHECKED in CPS ... or it won't work)



doug

Would you happen to have the pinout from the KVL to XTS5000?

Thanks a million

[batdude]

TDN9390


it's the KVL to JEDI cable here:


http://batboard.batlabs.com/viewtopic.p ... ht=tdn9390

[Hightower]

TDN9390


it's the KVL to JEDI cable here:


http://batboard.batlabs.com/viewtopic.p ... ht=tdn9390

Excellent. Thanks a million