David Clark Pin Out

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Kirk Higgins
Posts: 46
Joined: Thu Nov 25, 2004 4:20 pm

David Clark Pin Out

Post by Kirk Higgins »

I'm trying to convert a David Clark Model C3032 headset adapter for use with an Icom IC-F121/221 radio. I've got the service manual for the Icom radios, but I need to know what the pin outs are for the modular plug on the headset adapter. Anyone happen to know what they are? Thanks.
Top
dbusse
Posts: 96
Joined: Wed Aug 28, 2002 7:56 pm
What radios do you own?: XTL, XTS, Saber, Spectra, MTS2

Post by dbusse »

The C3032 is for a Yaesu VX-3000U. My experience has been that the engineering staff at David Clark is ALWAYS most accommodating in providing prints and drawings to their headsets and adapters. I would call them at 508 751-5800, and they will fax or email you a copy of the drawing for the adapter that you have.

I have converted 8 of their headsets from one use to another, but some 6000 and 7000 series. Great equipment; great support...

Dan
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”