Maratrac A7 Controlhead Pins

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
bnn121
Posts: 197
Joined: Sat Apr 27, 2002 5:09 am

Maratrac A7 Controlhead Pins

Post by bnn121 »

On the back of the Maratrac Control head (A7) there is the black multi pin accessory connector that normaly has a blue jumper located within it. Well, I need to know if anybody remembers what pins this jumper is connected to.

Thanks
Top
User avatar
wx4cbh
Posts: 337
Joined: Tue Aug 05, 2003 6:01 pm

Post by wx4cbh »

VIP plug pins 20 and 37 for the blue jumper. Looked it up in the manual, and then confirmed it on an A7 head.
curmudgeon.....and I like it.
Top
User avatar
bnn121
Posts: 197
Joined: Sat Apr 27, 2002 5:09 am

Post by bnn121 »

Thanks You very much
Top
WB4GUD
Posts: 3
Joined: Sun Mar 26, 2006 8:25 pm

A7 VIP

Post by WB4GUD »

You can also add JU1004, which does the same thing.
Howard
WB4GUD
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”