How do I build a repeater?

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
User avatar
losangelescop
Posts: 153
Joined: Fri Jun 23, 2006 3:28 am

How do I build a repeater?

Post by losangelescop »

Hi all, i would like some info on how to build a repeater myself, what i would need, expected prices (probs gunna get it all 2nd hand off of eBay). i need between 16-40 channels and it needs to be UHF high split, anything that would accommodate 476-477MHz, such as the 450-512MHz radio bandsplit. thanks for any help, its appreciated.
Motorola, Federal Signal and the MX7000 RULE!
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

repeater?

Post by Tom in D.C. »

Under what FCC service/license would you be operating?
Why the need for so many channels?
More details needed before anyone could even begin to
help you with this project.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
User avatar
losangelescop
Posts: 153
Joined: Fri Jun 23, 2006 3:28 am

Post by losangelescop »

hey, no FCC licence required, i live in Australia and i am operating on the public frequencies, there are 40 channels on our public frequencies so i kinda figured i would want them all incase i want change the public channels we operate on. BTW we will be using Motorola GP328 Portable Radios, which is Australias version of the HT750. i would probs need communication to cover a wide area, about 45.5 square miles. thanks
Motorola, Federal Signal and the MX7000 RULE!
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

Australia is even more strict than the FCC here in the US.

ALL radios used MUST meet and be listed in the register.

The repeater HAS to be licensed even tho it is on the Aus CB service.

IIRC, the max power is 25 watts for fixed stations/repeaters.

Check the regulations out first.
User avatar
losangelescop
Posts: 153
Joined: Fri Jun 23, 2006 3:28 am

Post by losangelescop »

ok thanks for the major info. heres another idea that i had....i was thinking that i could have just a regular base station, but would the base station even amplify the signal and pass it on? or am i totally incorrect and will that not even work????

thanks....
Motorola, Federal Signal and the MX7000 RULE!
User avatar
mr.syntrx
Posts: 1587
Joined: Wed Apr 28, 2004 10:09 pm

Post by mr.syntrx »

Max power for a UHF CB repeater is 21W EIRP.

A base station, as in a fixed radio in your house, won't amplify anyone's signal. You'll be limited to 5W like a mobile radio, but you'll have an advantage of being able to install a superior antenna to what you'd find on a vehicle, portable radio etc.
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”