On my HT1250 portables is it possible to see on the display the code of who ever is transmitting? If so what is needed in programming for this display? I currently have the portables loaded to transmit MDC codes and to receive, Is there something I missed.
Thanks, Chris
HT1250 MDC Display
Moderator: Queue Moderator
-
nysmedic226
- Posts: 27
- Joined: Thu May 04, 2006 7:01 pm
- What radios do you own?: P1225/CDM1250/HT1250/XTS3000
-
VE9MP
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 429
- Joined: Wed Jan 05, 2005 11:38 am
- What radios do you own?: FPP Railroad XTL9000 Cleancab
Hello...
Assuming you have your MDC signalling system setup already, you have to go to the "Call" section under CPS and go on "MDC Call" sub-directory, from there you can set how you want the MDC ID's to display, and lets you enable aliases for them, for example, you can program it to display "DISPATCH", if the MDC ID for your dispatcher is being transmitted...
Hope that helps...
Assuming you have your MDC signalling system setup already, you have to go to the "Call" section under CPS and go on "MDC Call" sub-directory, from there you can set how you want the MDC ID's to display, and lets you enable aliases for them, for example, you can program it to display "DISPATCH", if the MDC ID for your dispatcher is being transmitted...
Hope that helps...
-----Nick-----
"I can trip some repeaters in Maine, but I'm not getting any audio into it, is there some type of tone frequency I use? If so do you know what one is for Maine?" - The SMT Machine
"I can trip some repeaters in Maine, but I'm not getting any audio into it, is there some type of tone frequency I use? If so do you know what one is for Maine?" - The SMT Machine