Cimmarron CIM-1000/Maratrac

KuhnElectronics · Post by **KuhnElectronics** » Sat Jul 15, 2006 3:28 am

Has anyone installed a CIM-1000 in a Maratrac?

I had some issues with 2 yesterday that were acting pretty goofy...

At first I was having PTT problems, but after a little trouble shooting I fixed that, but now the FSK burst out of the radio sounds like crap...

I have the data out connected correctly to where Cim says it goes... but they may be wrong...

Will · Post by **Will** » Sat Jul 15, 2006 5:26 pm

KuhnElectronics wrote: I have the data out connected correctly to where Cim says it goes... but they may be wrong...

Where din Cim say to connect the PTT and the DATA out?

KuhnElectronics · Post by **KuhnElectronics** » Sat Jul 15, 2006 6:01 pm

now that i am home i dont have the install sheets in front of me,

however i did remember that both of those connections were made on transistors if that makes a difference...

jackhackett · Post by **jackhackett** » Mon Jul 17, 2006 7:02 am

Did you adjust the deviation in the CIM-1000 programming?

Cimmarron CIM-1000/Maratrac

Cimmarron CIM-1000/Maratrac

Re: Cimmarron CIM-1000/Maratrac