CDM 1250 filtered audio issue

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
rrfd43
Posts: 434
Joined: Wed Mar 06, 2002 4:00 pm
What radios do you own?: Cobra 25 LTD Classic with echo

CDM 1250 filtered audio issue

Post by rrfd43 »

I have a cdm 1250 vhf with firmware 5.4. The main CDM 1550 I get filtered audio for the base monitoring system off of is broken. When I hook up the 16 pin accessory connector to the 1250 it has constant squelch ( only off the rear connector, front speaker audio squelch is muted) It acts like flat audio, not filtered. Recieve conversation sound as normal. The programming shows filterd audio set for pin 11. I am using pin 11 and 7 for the take off points. Any ideas why it does not work the way I would expect????
Top
ve3nsv
Posts: 291
Joined: Sat May 27, 2006 8:43 am

Post by ve3nsv »

You have the radio programmed for filtered audio in the accessory configuration window? Something doesn't seem right there, can you PM me your code plug?

Worse case you could always use speaker or handset audio unless the radio is being used locally as well?
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”