GP350 Programming Adaptor

Vercomm · Post by **Vercomm** » Thu Aug 03, 2006 8:21 am

Hi guys,

I have recently purchased a motorola programming jig for the GP300/P110. It works great but it didn't come with the adaptor plate for programming GP350's. Does anybody have the part number so I can order it from motorola.

Thanks,

Jamie

Lake Effect · Post by **Lake Effect** » Thu Aug 03, 2006 10:34 am

I don't know if there is a kit number but you need two pieces.
RLN4514 and RLN4515.

L.E.

Post by **HumHead** » Thu Aug 03, 2006 11:22 am

You don't really need two pieces if you are managing both models. You can just use the GP350 adapter plate for the radio, and put a GP300 battery on the battery side.

Bat2way · Post by **Bat2way** » Thu Aug 03, 2006 2:06 pm

Don't need anything extra but jumper wires for the serial port and battery hook-up off the GP300 programming adapter.

Will · Post by **Will** » Thu Aug 03, 2006 5:48 pm

Bat2way wrote:Don't need anything extra but jumper wires for the serial port and battery hook-up off the GP300 programming adapter.

Yah, a good way to brick your radio.

Post by **HumHead** » Thu Aug 03, 2006 6:35 pm

... and not a lot of fun when you're doing a couple of hundred at a sitting.