CDM 1550 low power

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
JD
Posts: 356
Joined: Tue Oct 16, 2001 4:00 pm

CDM 1550 low power

Post by JD »

On a CDM 1550 10 to 25 watt radio, how low can you turn the power down , down to 4 watts ?
ve3nsv
Posts: 291
Joined: Sat May 27, 2006 8:43 am

Post by ve3nsv »

In the radio CPS under configuration / TX power you should be able to set the high and low power settings. Then in the conventional personality you have to choose high / low power.
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: CDM 1550 low power

Post by Will »

JD wrote:On a CDM 1550 10 to 25 watt radio, how low can you turn the power down , down to 4 watts ?
No lower than 10 watts any lower can cause instability, spurious signals and transmitter transistor overheating.

This is why they are rated 10 to 25 watts.
JD
Posts: 356
Joined: Tue Oct 16, 2001 4:00 pm

CDM

Post by JD »

Thanks for all the info.This is a great site.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”