GP300 No Power-up Tone?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Glenn
Posts: 79
Joined: Sat Jun 21, 2003 10:00 am

GP300 No Power-up Tone?

Post by Glenn »

My GP300 has no power up alert tone or tone when a receive only channel PTT switch is pushed. The red LED lights when transmitting, green while scanning and the radio seems to work fine otherwise. I also tried a battery eliminator as well as the battery. I haven't reprogrammed this radio recently either. Is there any RSS setting for the self test of the microcomputer check or tone option when on a receive only when the PTT button is pushed? Any other suggestions? Thanks...
Top
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Post by Will »

May be the Alert Tones are disabled in the RSS programming on that GP300.

In the Change/View:Radio Wide screen. Alert Tones All ON or All Off.....
Top
Glenn
Posts: 79
Joined: Sat Jun 21, 2003 10:00 am

Post by Glenn »

Thanks Will....that's exactly what it was. I haven't used or programmed this radio in so long, I guess they were never enabled. Tones are working again....
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”