Motorola CM 300 Repeater

[JD]

Has any one had success in using a CM300 and CDm1250 with a Motorola rick to build a cross band repeater ans how did you configure it ?

Set up I am trying, the CM is set up as the transmit radio, and it is keyed at all times.

Thanks.

[HLA]

just use the drop down box in the acc port setup and select rick tx and you should be good to go.

[JD]

Did that, does not work, followed instructions to the "t". Think it has to do with the voltages on the CM accessory pins, they are different from previous radios.

[JD]

I made up a simple repeater board as described on Batlabs, it is from the rick audio processor circuit, interfaced 2 CM 300's and it worked great.

Would not work when I used a rick either in the uni or bi directional configuration.

Any Ideas ?

[HLA]

TRY SWAPPING THEM AROUND AND USE THE CDM FOR TRANSMIT AND THE CM FOR RECIEVE. I HAD A CDM THAT WOULDN'T WORK ON RECIEVE.