Cloning Problem

[Max]

Hi
I have 2 Motorola Astro Spectra's VHF Trunking.
Radio 1: Model: D04KKH9PWAN
Firmware: 08.03.xx.xx
DSP: I06.03.00
1 Meg
System Package: G51
Radio 2 :
Model : D04KKH9PWAN
Firmware:N08.02.06
DSP: N08.02.06
System Package:G51
1Meg 2.5 Khz
I am trying to clone radio 1 to radio 2 using CPS.Radio 2 takes the C/P but will not clone the same OBT Control Channels or the Channel Assignment Channels,but takes all the conventional channels and works fine.When i try to change the OBT and Assignment channels ,the box turns red and will not let me keep the change.
Also,when i take the V-Board from radio 1,and put it in radio 2 the trunking works fine.
Any ideas what i am doing wrong?
Thanks for any help
Max

Back to top

[bellersley]

V-Board, eh?

Do you have the correct system keys? IIRC, you cannot clone a trunking system unless you have the key.

[Max]

V-Board = Vocom Board Radio number 2 is taking the sys ID's
The CPS is loaded with all the correct keys.
When i read radio number 1 ,the C/P shows it has the systems keys in the C/P in the CPS,when i clone it to radio number 2,the radio shows the corect system keys.
Max