Need 2 MT2000 VHF programmed ASAP

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
wkr518
Posts: 431
Joined: Mon Jan 23, 2006 11:34 am

Need 2 MT2000 VHF programmed ASAP

Post by wkr518 »

As luck would have it out older PC for programming MT2000 has called it quits.
I am in upstate NY ( Albany) area and in need of 2 MT2000 being programmed to 16 channels ( with PLs) in each.
Feel free to PM or email me.
I will pay inbound/outbound freight via UPS Ground.Need quick turnaround on it.
Thanks
Wayne

p.s- can provide proof of channel use authorization if that is an issue.
Top
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: Need 2 MT2000 VHF programmed ASAP

Post by n7maq »

wkr518 wrote:As luck would have it out older PC for programming MT2000 has called it quits.
I am in upstate NY ( Albany) area and in need of 2 MT2000 being programmed to 16 channels ( with PLs) in each.
Feel free to PM or email me.
I will pay inbound/outbound freight via UPS Ground.Need quick turnaround on it.
Thanks
Wayne

p.s- can provide proof of channel use authorization if that is an issue.
You don't need an older, slower computer for MTSX. It will run just fine on most Pentium computers. You may not need to send it off. It does need to be run in DOS though.

I would be glad to help you out with the programming, but I'm out here on the west coast. UPS Ground = 6 days one way. :cry:

Jim
Top
User avatar
spectragod
Posts: 2029
Joined: Sun Dec 30, 2001 4:00 pm
What radios do you own?: FPP 6 meter XTL 5K's

Post by spectragod »

PM me, I'm in Ohio, a little closer.

SG
Top
Post Reply

Return to “Radio Programming”