Part Number Needed

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
Tron
Posts: 260
Joined: Fri Sep 14, 2001 4:00 pm
What radios do you own?: Too many to list

Part Number Needed

Post by Tron »

Looking for the part number for the charging LEDs used in the NYN-8346B desk chargers for the Minitor 4. Called /\/\ot parts ID and they didn't have any info on this. Several years ago, I was able to get them, but lost the number over the years.

Any help appreciated..I don't want to buy new chargers for just a simple fix.

Tron
"Where the Old Soo crosses the New Soo, Duplainville, Wisconsin"
Top
Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Post by Al »

As far as I know, M has never published a part number for the LED you're asking about. On a tip from Bob (AEC) here on the board I purchase mine from Mouser, their p/n 606-CMD67-21YVC and the Chicago Miniature p/n is CMD67-21YVC/TR8.
Top
firetech792
Posts: 153
Joined: Mon Aug 16, 2004 12:08 pm

Post by firetech792 »

I could never get that part number either. And for some reason, they do go bad often.
Something else I have done in a pinch. Switch the bad front LED with the one from the rear battery charging contacts.
Top
User avatar
Tron
Posts: 260
Joined: Fri Sep 14, 2001 4:00 pm
What radios do you own?: Too many to list

Post by Tron »

OK, thanks...will check out /\/\ouser for these.

Tron
"Where the Old Soo crosses the New Soo, Duplainville, Wisconsin"
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”