I received an HT750 UHF 4ch along with a charger, model# HTN9000B. After plugging the unit in, it blinks red with nothing in the charger. I metered the adapter, model# 481810003NT, which says "Output: 18VDC 1000mA" -- Well, my meter said it was about 16VDC.
Does this sound like a dead adapter, or is the voltage OK and the charging unit shot?
HT750 charger
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
that shouldn't make the charger blink like that, i've used the ht1000 wall warts on them before and they work fine and they are 13.8v and 1.5amp so i'd say it's a problem with the charger itself.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS