help setting up my computer to run mts 2000 software
Moderator: Queue Moderator
-
prolights&radios
- Posts: 1
- Joined: Thu Jan 11, 2007 7:03 pm
help setting up my computer to run mts 2000 software
I need hel setting up my computer to operate the mts 2000 software?
If you are using windows 98, then you can use Rss version R06.07 under the rebooted DOS mode once restarted.
I do this all the time with my machines and so far, I have not had any troubes.
I use a mix of old and newer(PIII, 700 Mhz) as well as one older panasonic toughbook.
Just follow the installation procedures, or you can copy the entire RSS to a directory aptly named, like R607, or MTS2000 or whatever you can easily recall, but if you change the way the RSS 'calls' to the RSS, you MUST go into the PC configuration and change the menu to reflect those changes or you will have troubles with saving files, loading TCMS files and more.
IE.....C:\MTS2000
Same goes for the backup drive select, main directory and system key files(read during RSS start up).
*It's so easy, even a caveman could do it*
I do this all the time with my machines and so far, I have not had any troubes.
I use a mix of old and newer(PIII, 700 Mhz) as well as one older panasonic toughbook.
Just follow the installation procedures, or you can copy the entire RSS to a directory aptly named, like R607, or MTS2000 or whatever you can easily recall, but if you change the way the RSS 'calls' to the RSS, you MUST go into the PC configuration and change the menu to reflect those changes or you will have troubles with saving files, loading TCMS files and more.
IE.....C:\MTS2000
Same goes for the backup drive select, main directory and system key files(read during RSS start up).
*It's so easy, even a caveman could do it*