Motorola 16 Pin Jumper Plug Part #

Mikey · Post by **Mikey** » Sat Jan 27, 2007 5:44 pm

Can anybody tell me the part # and price for the 16 pin jumper plug used on the GM300 to jump the Internal Speaker leads.

Thanks in Advance

Mikey

MetroMan · Post by **MetroMan** » Sat Jan 27, 2007 6:07 pm

HLN9242 is the 16 pin accy kit with a connector, 9 wires with a connector on one end, 16 crimping terminals and a removal tool. List is $5.65.

There's a part # for just the connector but I don't have that available. I'll post it Monday if nobody else comes up with it.

aaknitt · Post by **aaknitt** » Sat Jan 27, 2007 6:28 pm

You can also get the connector and sockets from Digikey. Quoting from http://www.batlabs.com/maxrad.html (the GM300 and Maxrad 16 pin connectors are the same):

# Connector, with locking tab 16 pin, 104422-1-ND (AMP 104422-1)
# Contact, A3007-ND(AMP 1-87309-3)

Andy

BrienD · Post by **BrienD** » Sat Jan 27, 2007 6:33 pm

If you are trying to activate the internal speaker and all you need is to short the twp pins I think 15-16, I use a computer jumper. I just bought ten for .99 at my local computer parts store.
Brien

Mikey · Post by **Mikey** » Sat Jan 27, 2007 6:46 pm

I've got the Acc. pin connector kit, but i need the actual jumper plug that Motorola puts on the back of there GM300 as standard.

MetroMan · Post by **MetroMan** » Mon Jan 29, 2007 6:12 am

If you have the connector kit you should be able to make your own jumper. I've never seen a part number for the plug with a jumper btwn 15 & 16.

Checked Digi-Key for the connector and looks like they only sell in 500 Qty. Mouser has them @ $1.52 for one and $1.37 each in ten quantities.
Mouser #571-104422-1