Power cable needed - MT1000 MVA

n9wys · Post by **n9wys** » Mon Feb 19, 2007 10:03 pm

I'm looking for a power cable for an MT1000/HT600 MVA.

I had one, but it's buried somewhere in my shack, and I'm on a tight schedule to get the installation done.

Does anyone know of a place where I can order one - other than Motorola Parts? Thanks!

AHSGA · Post by **AHSGA** » Tue Feb 20, 2007 6:14 pm

I purchased a bunch of the connectors and pins to the mt1000 mva power cable. I would be willing to mail you one if you want. You should, however, avoid the pin out on bat labs for the connector. It leads to letting the smoke out.

Regards

mt1000ff · Post by **mt1000ff** » Tue Feb 20, 2007 9:40 pm

I was looking for the same plug/cable for my MT1000 mtv also. While looking through a building about to be destroyed found that the old gas furnaces used the same plug with real heavy wires. I did use the Batlabs pin out for the plug and it works fine. You might try a HVAC supply house. Wires were colored white and black though with no fuse.