CODEPLUG REQUEST: CDM1250 UHF 403-470

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
kb1nuo
Posts: 3
Joined: Wed Feb 21, 2007 6:26 am

CODEPLUG REQUEST: CDM1250 UHF 403-470

Post by kb1nuo »

I have a CDM1250 AAM25RKD9AA2AN from eBay with a bad codeplug. Can anyone help me out finding a working one please?

edit: fixed model number and bandsplit
Last edited by kb1nuo on Wed Feb 21, 2007 9:59 am, edited 1 time in total.
Top
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Post by HLA »

your radio is not a 450-512, it's a 403-470. if it was the high split like you poste the model number would be aam25skd9aa2an
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Top
kb1nuo
Posts: 3
Joined: Wed Feb 21, 2007 6:26 am

Post by kb1nuo »

Fixed the bandsplit in the title, thanks.
Top
kb1nuo
Posts: 3
Joined: Wed Feb 21, 2007 6:26 am

Re: CODEPLUG REQUEST: CDM1250 UHF 403-470

Post by kb1nuo »

kb1nuo wrote:I have a CDM1250 AAM25RKD9AA2AN from eBay with a bad codeplug. Can anyone help me out finding a working one please?

edit: fixed model number and bandsplit
Still not much luck with this radio. After playing with the programming and tuner a bit I've gotten it to RX OK, and it does transmit OK power, just no audio or PL/DPL regardless of the mics I've tried. Can anyone help me out?
Top
ve3nsv
Posts: 291
Joined: Sat May 27, 2006 8:43 am

Post by ve3nsv »

If you want you can e-mail me the codeplug at [email protected] and I will have a look?
Top
User avatar
nmfire10
Batboard $upporter
Posts: 4109
Joined: Sat Jun 29, 2002 4:41 pm

Post by nmfire10 »

If you have it in scan, there is an option to have it not use PL/DPL in scan. In the scan list, set the PL Scan for Priority and Non-Priority. Also just uncheck the HOOK DEFEATS PL checkbox under basic.
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com

eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"
:-?
Top
Gocart878
Posts: 157
Joined: Sat Jul 31, 2004 12:00 pm

Re: CODEPLUG REQUEST: CDM1250 UHF 403-470

Post by Gocart878 »

can someone send me a codeplug for a 403-470mhz cdm1250. i bought this off ebay and it has a password lock on it. i am to dumb to winhex this thing apart and would prefer just writing over a previous codeplug. email is [email protected]. thanks
Top
Post Reply

Return to “Radio Programming”