Low band Maxtrac power problem-update

[pony192]

Opened the radio up to do the manual power control mod and found out I have the HLN5172A 5 pin logic board. Does anyone have the info on where to cut the board trace on this one? It has the V5.34 chip so it will be a keeper if I can get this mod finished.

Thanks, Steve

[alex]

There is no need to start a new topic with this information. Please update your original topic, which can be found here:

http://batboard.batlabs.com/viewtopic.php?t=66639

This topic will be locked. If you update your original topic with your new findings, we'll just make this one disappear.

Thanks!

Alex