HT1250 HELP!!!

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
tommed
Posts: 1
Joined: Sun Apr 24, 2005 4:41 pm

HT1250 HELP!!!

Post by tommed »

I have programed my HT1250 made in Aug 2004 and I am being told it sounds muffled. My department is running a Kenwood repeater I have gone in and turned the compander on and it still sounds muffled. It recieves fine but transmits muffled I am using the mic on the radio I have ordered an ext mic to see if that changes. I have no tried it on another freq yet. Any suggestions.
Top
DPL
Posts: 185
Joined: Wed Jul 31, 2002 5:48 am

Post by DPL »

I have no experience with HT1250s, but with MT/MTS2000 radios the pre-emphasis sometimes gets turned off. If the HT1250 has this option, you might check to make sure it is turned on. If it is turned off it can cause the transmit audio to sound muffled to other users.

Just a wild guess.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”