This forum is dedicated to helping people with questions about installing radio equipment in vehicles. This can include antenna installs, electrical wiring questions/problems, and mounting systems. Pictures of installs are welcome.
Note: Discussions regarding lighting, sirens, and other equipment now has its own forum in the 'off-topic' section below.
this is my install in a 05 impalla X2 spectras remote head 1 vhf 1 uhf CB lol gps roof mount for laptop code 3 rls hl strobes and flashers fog light strobes tail light flashers and strobes red and clear dash light red led near mirror arrow stick with X2 drop down red/clear led lights and my own wire tray i want this car
fineshot1 wrote:What brand/model & where did you get that equipment mounting shelf?
Nice job. I have a 2000 LS model and would like to find that shelf.
I also would like to know what kind of trunk tray that is.
sorry bout the long delay the board is a black plastic 3/4 inch thick then custone to fit the trunk plywood would hold in moisture so did not use it the optocom is hooked up in to my lower fog left side light it work from a good 5 city blocks away the power supply issue the more heads u have on the power supply the less power it produces i wanted the lighting to be bright and i have a 90 way to replace the 60 but never got the chance i have a 1/4 in thick aluminum piece of flat stock to hold up controls yes i do have the thick plastic velcro there but it was wwhen i had it in my pickup never took it off i say i am lazy on that one but hey i will get some out side video night and day
joparka wrote:sorry bout the long delay the board is a black plastic 3/4 inch thick then custone to fit the trunk plywood would hold in moisture so did not use it the optocom is hooked up in to my lower fog left side light it work from a good 5 city blocks away the power supply issue the more heads u have on the power supply the less power it produces i wanted the lighting to be bright and i have a 90 way to replace the 60 but never got the chance i have a 1/4 in thick aluminum piece of flat stock to hold up controls yes i do have the thick plastic velcro there but it was wwhen i had it in my pickup never took it off i say i am lazy on that one but hey i will get some out side video night and day
Punctuation and capitalization are your friends!!
Sorry bout the long delay. The board is a black plastic 3/4 inch thick then custom to fit the trunk. Plywood would hold in moisture so did not use it. The optocom is hooked up in to my lower fog, left side light it, works from a good 5 city blocks away. The power supply issue, the more heads you have on the power supply, the less power it produces. I wanted the lighting to be bright and I have a 90w to replace the 60w but never got the chance. I have a 1/4 in thick aluminum piece of flat stock to hold up controls. Yes I do have the thick plastic velcro there but it was wwhen I had it in my pickup, never took it off . I say I am lazy on that one, but hey. I will take some outside video , night and day.[/b]
lol gps roof mount for laptop code 3 rls hl strobes and flashers fog light strobes tail light flashers and strobes red and clear dash light red led near mirror arrow stick with X2 drop down red/clear led lights and my own wire tray
i want this car 
