Info in Comtegra Console wiring diagram

n9pay · Post by **n9pay** » Sat Mar 24, 2007 6:38 am

I am looking for the wiring diagram for a Comtegra L1927A console which we have interfaced to a Quantar repeater/base for our fire department. Someone disconnected the 2 wires (red and black) from the control line to the console Line 1 and we really don't want to hook them back up backwards. Any ideas?

misawatech · Post by **misawatech** » Sat Mar 31, 2007 3:47 am

which end are you looking for? The comtegra end or the quantar end? On the back of the quantar, for a 2 wire setup, you need to use the 3rd and 4th terminals. This is from the right as you are looking at the back of the unit on the 8 terminal block.

When I get back to work I can give you specific terminal markings as well as the comtegra terminals.

As far as hooking them up backwards I don't think that is an issue unless you are using a 4 wire system. I may be wrong but they only send out tones to tell the quantar when to key up.

n9pay · Post by **n9pay** » Sun Apr 01, 2007 4:55 am

I was looking for the comtegra end. I ended up finding a manual which showed that pin 1 is + and 2 is -. Problem solved! Thanks for Quantar end of the information!
Chad