/\/\ Saber 1E & Saber 2 Question.........

themedic66 · Post by **themedic66** » Thu Apr 19, 2007 1:35 am

What does the two(2) buttons highlighted in the boxes do, or what can they be programmed to do? I have noticed that one of the buttons has one(1) dot, and the other button has two(2) dots. Three(3) of them are Saber 1Es and 1 is a Saber 2. Information on this would be helpful and appreciated. <a><img src="http://i30.photobucket.com/albums/c342/ ... 012_21.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

Post by **Grog** » Thu Apr 19, 2007 1:43 am

Just for grins, here's his picture.....

W4WTF · Post by **W4WTF** » Thu Apr 19, 2007 4:12 am

Unless you have a Systems Saber or a late one with a 6D or 8D core, they don't do a dmm thing.

I have a few early cases that don't have them.

K2JLX · Post by **K2JLX** » Thu Apr 19, 2007 5:32 am

My understanding is that those buttons are for repeater access tones (RAT).

DJP126 · Post by **DJP126** » Thu Apr 19, 2007 4:13 pm

k2jlx wrote:My understanding is that those buttons are for repeater access tones (RAT).

He is correct. They are R.A.T. buttons and with the standard Saber, you must have the 6D or 8D core (as mentioned by W4WTF).