CP200 QCII Help

Vercomm · Post by **Vercomm** » Thu Apr 19, 2007 9:33 am

Hi Guys,

This may be a simple answer but I just haven't had the time to really investigate it. We have a zetron dispatch console and we want it to generate QCII tones in the A-B format. The radios we are usig are CP200's.

My questions are:

How long should Tone A generate?

How long should Tone B generate?

Should there be any pause between A and B?

Thanks guys, your help ismuch appreciated!

RKG · Post by **RKG** » Thu Apr 19, 2007 3:41 pm

The key is that the subscriber equipment and the dispatch equipment have to have the same format. That said, the "usual" format is 1 sec. tone A, 0 sec. gap, 3 sec. tone B, with Long B of 6 sec.

Vercomm · Post by **Vercomm** » Thu Apr 19, 2007 3:56 pm

Thanks RKG, with any encoders I programm for two-tone I usually go 1100ms tone A, then 3015ms tone B. Just wanted to make sure that I was on the right track