part number for 3 watt cell phone

KitN1MCC · Post by **KitN1MCC** » Sun Apr 29, 2007 11:35 am

i need the part number for the extension cable from the brick to the handset the one with the screw mounting holes or if some one has one

mikegilbert · Post by **mikegilbert** » Sun Apr 29, 2007 2:28 pm

I found SKN4070 which is the 2' model. And SKN4235 which is the 18' model. (note google can only find one reference to the 18' P#)

SKN4467A/ SKN4467 lists as a 16.05' data cable with no mounting bracket.

Getting ready for an XTVA install?

-Mike

KitN1MCC · Post by **KitN1MCC** » Mon Apr 30, 2007 5:17 pm

extension for cdm1250

n7maq · Post by **n7maq** » Mon Apr 30, 2007 5:32 pm

The stock CDM is a 10 pin mic, but a 1056 will work just fine.

The cable you want is NLA. IIRC they were only $6.00, or $7.00 dealer cost. Kenwood also makes one, but it is over $25.00. I would just put a want add out for one. I recall just 5 years ago, tossing them into the trash all the time. Now save them when ever I see them.

Jim

mr.syntrx · Post by **mr.syntrx** » Mon Apr 30, 2007 10:46 pm

Otherwise, make your own out of a 4-pair phone extension lead, and one of those female-female joiners.

Post by **escomm** » Tue May 01, 2007 6:43 am

KitN1MCC wrote:extension for cdm1250

Like for a remote mount kit?

The data cables are RKN4077 (3m) RKN4078 (5m) and RKN4079 (7m)

Ps. They range from $5-10

KitN1MCC · Post by **KitN1MCC** » Wed May 02, 2007 11:07 am

yeah like a remote but just for the mike the Analog cell phone ones have a nice set of hole for screws