G'Day
I would like to know how to with out hacking into the NTN1340c MTVA supply it with power I have placed numerous post in the wanted to buy section for the plug with no replies so can someone please tell me how to get power into it
I intend to use it as a stand alone unit although I think I need a contrler so if someone has a part number for it that would be even better or a spare one I would be over the moon band split required is 403-470
Thanks
power for MTVA
Moderator: Queue Moderator
power for MTVA
Regards Peter R
To ask a question is to look a fool for 5 minutes not to ask is to be a fool for life
To ask a question is to look a fool for 5 minutes not to ask is to be a fool for life
You don't, unless you want to build the entire charger, which is microprocessor based.
All the charger circuitry is located in the control unit. see the other post for controller part numbers.
The universal control unit has no RF power amp, all the other units have band specific RFPA's.
All the charger circuitry is located in the control unit. see the other post for controller part numbers.
The universal control unit has no RF power amp, all the other units have band specific RFPA's.
-- Welcome My Son, Welcome To The Machine --
Bob Vaughan | [email protected]
AF6RR | P.O.Box 19792, Stanford, Ca 94309
-- I am Me, I am only Me, And no one else is Me, What could be simpler? --
Bob Vaughan | [email protected]
AF6RR | P.O.Box 19792, Stanford, Ca 94309
-- I am Me, I am only Me, And no one else is Me, What could be simpler? --