Saber2 codeplug

[Simpen84]

Hey all.

I recently got a new saber radio, but it reads the ERR 0 81, so I was thinking I could ask you guys and see if anyone has a good codeplug for a saber 2 VHF radio lying around and would consider sharing it with me. Preferably, i would need one that covers 136-174, securenet, hi power 3 button display.

Thanks in advance, any help is greatly apprechiated.

[WV8VFD]

If you have RSS, you should be able to make one. Go to Create/Save radio personality file, hit create, and just follow the steps.

[Simpen84]

yeah I have done this, but I would like to try with one that is confirmed working. none of the ones I create will get rid of th error.

[FireCpt809]

then its most likely a hardware issue. The computer is too fast or the rib box/ cable is not right..

[Simpen84]

I suspect that as well, however, its no problem reading radios with version r7.00.00

I guess I will have to rig up the good ol' 33mhz again and see if there is any difference in outcome.

[FireCpt809]

I can read all day with a faster computer with 7.01 But when its time to write It gives me the same Error code. I use an old slow toshiba 386 for anything older.

[Simpen84]

Thanks alot mate. Ive got the old 33mhz at the desk, just ran into some trouble when I noticed the VGA cable from my new monitor wont fit the 33mhz. Will have to go get a new monitor or VGA cable.

I hope writing it with the old computerwill solve the problem. Its just a shame the laptop wont work, would have been handy to have for field work.

[Simpen84]

The saber2 is now alive and kicking. Everything worked flawless with the 33mhz computer. No more checksum errors or nothing. Thanks guys.