Marine 800MHz antenna

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
opd1653
Posts: 12
Joined: Fri Nov 02, 2001 4:00 pm

Marine 800MHz antenna

Post by opd1653 »

Hi:

Looking for suggestions for a suitable marine/boat antenna for a new installation on a boat. We are installing a trunked 800MHz mobile, and have looked at Shakespere(sp?) but found only a cell type antenna. The cabin is aluminum and wanted to mount the antenna on it. Fiberglass antenna with a fold-over option would be nice. Thanks for any suggestions!

Al
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Post by fineshot1 »

I dont think you will find anything in the 800mhz range with a fold-over option. I would recomend something like the maxrad mfb-8133. Its a small fiber glass base station antenna slightly longer than 2 feet and does not require a ground plane.
fineshot1
NJ USA
User avatar
Bruce1807
Posts: 1203
Joined: Mon Jan 16, 2006 7:18 am

Post by Bruce1807 »

Digital Antenna, Inc.
563-CW or the 883-CW

We use them on our police boats. These antennas are for cell but run from 810-950 so unless you are in the real low trunk channels they work fine.
List is about $220 but you should be able to find them for about $150

The problem with using a base antenna for marine is they cant handle the pounding and will soon fall apart.
opd1653
Posts: 12
Joined: Fri Nov 02, 2001 4:00 pm

Re: Marine 800MHz antenna

Post by opd1653 »

Thanks for all the replies, I'll look for those antennas at a local vendor.

Al :D
spareparts
Batboard $upporter
Posts: 502
Joined: Fri Dec 19, 2003 5:33 pm

Re: Marine 800MHz antenna

Post by spareparts »

opd1653 wrote:Looking for suggestions for a suitable marine/boat antenna for a new installation on a boat. We are installing a trunked 800MHz mobile, and have looked at Shakespere(sp?) but found only a cell type antenna. The cabin is aluminum and wanted to mount the antenna on it. Fiberglass antenna with a fold-over option would be nice.
This will work for you: http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0127409275 . Tessco also sells it under P/N 330167

It has an external 1-14 thread, so you need an adaptor to make it work with a lay down mount (Shakespeare Style 5187 Ratchet Mount and Style 4006 double Female Ferrule for example).
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”