CDM1250 power problem
Moderator: Queue Moderator
-
fire_master_21
- Batboard $upporter
- Posts: 694
- Joined: Sun Mar 14, 2004 3:23 pm
- What radios do you own?: Motorola/Kenwood
CDM1250 power problem
I have a buddy that hooked up a cdm1250 in his truck over the weekend. The radio worked great for about 48 hours. It was hooked up using the ignition sense at pin #10. All leads were properly fused. Said radio will no longer power up at all. Nothing has been messed with since installing it. Checked to power to the radio, and fuses. Everything in that aspect it fine. Radio has a good ground. I even took this radio and tried it in my truck as well with the same results. Anyone have this problem before? I have used the search but found nothing relating to this particular problem.
Light travels faster than sound. This is why some people appear bright until you hear them speak.
-
fire_master_21
- Batboard $upporter
- Posts: 694
- Joined: Sun Mar 14, 2004 3:23 pm
- What radios do you own?: Motorola/Kenwood
Re: CDM1250 power problem
*bump*
Does anyone work on these things here on the board?
Does anyone work on these things here on the board?
Light travels faster than sound. This is why some people appear bright until you hear them speak.
Re: CDM1250 power problem
Sounds like the good old EEPROM, off to Motorola for flat rate repair.
-
fire_master_21
- Batboard $upporter
- Posts: 694
- Joined: Sun Mar 14, 2004 3:23 pm
- What radios do you own?: Motorola/Kenwood
Re: CDM1250 power problem
thats kinda what I thought. Any idea on how much it is for flat rate on this things?
Light travels faster than sound. This is why some people appear bright until you hear them speak.
Re: CDM1250 power problem
$284 iirc