Motorola Keynotes Tone & Voice w/Display

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
User avatar
n9upc
Posts: 860
Joined: Mon Oct 21, 2002 3:43 pm

Motorola Keynotes Tone & Voice w/Display

Post by n9upc »

I know Motorola use to make Keynote pagers that also had a dispaly on it. I was told that in essence it was a T&V keynote with a Bravo numeric pager fused together. So I have a few questions about these things:

1.) Is the voice portion have it's own crystal while the numeric has it's own or do they both share the same freq/crystal?

2.) Is the signalling for the T&V portion 2 Tone or 5/6 Tone?

3.) Is the signalling for the Numeric portion Golay or POCSAG?


If anyone knows that would be great and thanks in advance.
" ah the fatman made a funny!" - Stewie from the family guy.

I went to the doctor and all he did was just suck blood. Never go to Dr Acula - M. Hedberg
RFguy
Posts: 1357
Joined: Wed Dec 21, 2005 6:17 am

Re: Motorola Keynotes Tone & Voice w/Display

Post by RFguy »

It is one pager. Not two piggy backed

It is one RF board and one decoder board that has both a numeric display section and an audio section for voice.
Post Reply

Return to “Motorola Digital and Voice Paging”