Saber Side Button - what features can be programmed?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
motosaber
Posts: 6
Joined: Mon Nov 27, 2006 10:59 am

Saber Side Button - what features can be programmed?

Post by motosaber »

The manual on the Systems Saber shows the two side buttons under the transmit switch as being programmable for features. What sort of functions / features are these two buttons capable? Thanks
AEC
No Longer Registered
Posts: 1889
Joined: Wed Dec 22, 2004 7:56 pm

Re: Saber Side Button - what features can be programmed?

Post by AEC »

The lower two side buttons on the Systems Sabers can be programmed for the following:

1. R.A.T(repeater access tones, 1 or 2) notice the '* and **' above each button to denote the function

2. Scan

3.Repeater talkaround

There's more, I just don't have the computer fired up to take a look at all of them, but you get the idea.
motosaber
Posts: 6
Joined: Mon Nov 27, 2006 10:59 am

Re: Saber Side Button - what features can be programmed?

Post by motosaber »

Thanks for the information / response.
RKG
Posts: 2629
Joined: Mon Dec 10, 2001 4:00 pm

Re: Saber Side Button - what features can be programmed?

Post by RKG »

On the conventional side, to AEC's list add instant message send and instand status send. On the trunked side, AMSS search and AMSS site lock.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”