Hello again,
Need a little information about using the accessory adabtor to get the MCS2000 to interface with the handfree device, My goal is to use the handsfree whilst driving and use the fist mic when the car is stationary. I've seen it setup in my local police cars so it must be able to be done!
thank you
MCS2000 Plus handfree interface device?
Moderator: Queue Moderator
-
- Posts: 26
- Joined: Sun Nov 26, 2006 11:03 am
-
- Posts: 26
- Joined: Sun Nov 26, 2006 11:03 am
Re: MCS2000 Plus handfree interface device?
i have a black box that allows handsfree operation. (visor mounted mic/ptt on the gear stick)
http://www.maximonsolutions.com/eazytalk.html its not the same one i have but it give you an idea.
[removed dupe postings -Alex]
http://www.maximonsolutions.com/eazytalk.html its not the same one i have but it give you an idea.
[removed dupe postings -Alex]
Re: MCS2000 Plus handfree interface device?
Is this what you want?
1 SPKR+
2 INT SPKR+
3 SPKR-
4 DIGITAL GND
5 BUSY
6 BUS+
7 I/O 8
8 I/O 5
9 EMERGENCY
10 ANALOG GND
11 FIL AUD OUT
12 AUX RX IN2
13 MIC IN
14 SW B+
15 IGNITION
16 I/O 2
17 LH RESET
18 BUS-
19 SCI RX DATA
20 I/O 4
21 I/O 3
22 RSSI OUT
23 EXTERNAL MIC IN
24 AUX TX IN2
25 UNIV IO OUT
1 SPKR+
2 INT SPKR+
3 SPKR-
4 DIGITAL GND
5 BUSY
6 BUS+
7 I/O 8
8 I/O 5
9 EMERGENCY
10 ANALOG GND
11 FIL AUD OUT
12 AUX RX IN2
13 MIC IN
14 SW B+
15 IGNITION
16 I/O 2
17 LH RESET
18 BUS-
19 SCI RX DATA
20 I/O 4
21 I/O 3
22 RSSI OUT
23 EXTERNAL MIC IN
24 AUX TX IN2
25 UNIV IO OUT