MT 1500

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
unioner101
Posts: 16
Joined: Tue Mar 29, 2005 8:28 am

MT 1500

Post by unioner101 »

I am interested in possibly purchasing an MT 1500 UHF 2, but I have a few questions, with only the 48 ch. is possible to do Smart Net and conventional channels in the same bank, and if so with they scan. Also, I know that is radio only supports analogue type II smartnet trunking, but will it do smartzone trunking of analogue.

Thanks
Kevin
Top
User avatar
d119
Posts: 3538
Joined: Tue Mar 19, 2002 4:00 pm

Re: MT 1500

Post by d119 »

unioner101 wrote:I am interested in possibly purchasing an MT 1500 UHF 2, but I have a few questions, with only the 48 ch. is possible to do Smart Net and conventional channels in the same bank, and if so with they scan. Also, I know that is radio only supports analogue type II smartnet trunking, but will it do smartzone trunking of analogue.

Thanks
Kevin
Yes, you can mix conventional and trunked systems in the same zone, and you can scan between them, although I'm not sure just how well the conventional + trunked scan works... I know there are caveats (no priority being one of them I believe). According to the product slick, the radio does support wide-area SmartZone.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”