Radio has been inhibited

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Radio has been inhibited

Post by Will »

I get this error reading several Spectras, from the same source.

. Radio has been inhibited

. Reprogramming will uninhibit

. Press F2 to continue

These Spectras also display FL 01/82, and no controls work.
So, how do they get inhibited they are conventional VHF radios?
Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: Radio has been inhibited

Post by Al »

Just a guess.....maybe via an MDC1200 packet?
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Re: Radio has been inhibited

Post by wavetar »

FL 01/82 is a codeplug checksum error. They likely aren't inhibited, the software just interprets the corrupted codeplug that way. Normally, inhibiting the radios does not produce any sort of error code onscreen.

Todd
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Radio has been inhibited

Post by Will »

Todd,

Thanks, that makes some sense. When I read the codeplug from the Spectra then look at the Mode screen, the RSS locks up and nothing is displayed in the Mode screen.

The info in the F2 and F3 screens seems to be intact tho.

In a few cases I was able to clone an existing codeplug from a different radio, and the inhibited radio seems to work OK.
motoguy
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 53
Joined: Sat Dec 18, 2004 4:22 pm

Re: Radio has been inhibited

Post by motoguy »

good evening all, i have this same problem with a XTS3000 uhf low split, i reprogrammed it for astro digital on simplex conventional as we do not use trunk or repeaters and i got a Fail 01/82 and when i try to read the radio it wont unpack the codeplug , i have a few saved codeplugs and it wont program any of these in to it it says the radio is inhibited!! its realy annoying me as the radio worked fine just before we changed it . im prety sure we are using cps version 4.01.04. anyone have any ideas? thanks in advance.
Einstein
Posts: 242
Joined: Tue Feb 21, 2006 4:20 am

Re: Radio has been inhibited

Post by Einstein »

I had several XTS 5000's that came up with 01/82 when trying to reprogram some new features into them. After a long search process I found that the groung wire in the OEM 4106a cable was bad and replaced the cable. It took more than once to reload the old saved codeplugs back into the radios to remove the 01/82 fail. One of the radios took 5 times to do it but it finally loaded.
motoguy
1 Warning for RSS/CPS Wanted/For Sale/Links
Posts: 53
Joined: Sat Dec 18, 2004 4:22 pm

Re: Radio has been inhibited

Post by motoguy »

cheers for the reply mate, and yes ive encounterd the 82 error before but never with the inhibited part....so after ten or so tries to reprogram the radio it worked, this time because of the inhibited part its proving to be a real bugger. cheers
Post Reply

Return to “Radio Programming”